The Top 10 Loopers Pedals For Your Guitar + Complete Buying Guide

Terminology:

Looping Time and Memory
Each loop pedal includes a maximum loop length, and this changes a lot. If you do not want your music to sound too repetitive, you may need a more maximum moment. Some looping pedals allow you to pile a vast or unlimited number of loops, while some have a cap to the amount total time of the loops. Think of how much looping you need before deciding.

Many looping pedals let you save loops in different slots for simpler management and to reuse loops in a later moment. Specific ones let you transfer your saved loops into your computer or smart device too. .

Different pedals have different approaches to the management concept and design.

Cheap, compact loop pedals tend to get a single footswitch for many looping operations. This can be very restricting and also make it difficult to do things in time. Some layouts have separate start and stop switches, and particular ones even have switches for different loops. As a rule of thumb, more switches are better.

A number of the simpler designs allow you to plug outside footswitches and saying pedals into gain more control.

MultiLoop
Standard looper units only have one loop line and may only allow you to play loops one at a time. The very best looper pedal can handle numerous loops, playing them at the same time or separately by using more than one loop. Some even have multiple inputs and outputs, which enables the looping of multiple instruments with a single pedal.

If you would like to create whole songs with looping as a central concept, you want a multiloop pedal.

Looping Modes
Many lovers can perform the loops back in altered manners, for example in reverse or at half rate. While this might seem like a gimmick to many conventional guitarists, it can be a very creative tool for a lot of musicians. These effects have become commonplace, but simpler often omit this attribute. If you like the idea, make sure that you get one with this attribute.

Synchronization
More sophisticated pedals often include a BPM setting which lets you set a specific tempo (in beats per minute) that the loop will utilize. When it’s a quantize function, it is going to correct your loops to be in excellent sync. Time stretching enables you to stretch the tape to match the loop length and rate. Auto-start is a nifty feature that starts recording the moment the processor picks a guitar sign. In this manner, you don’t have to hit the record button the same millisecond you start playing with. This makes timing much simpler.

A number of the more high-tech looping pedals utilize MIDI sync. This permits you to send signals from your own computer or an electronic instrument to start, stop, set the tempo, and more.

 

Enjoy our guide of the best cheap loopers review!

Boss RC 3 Loop Station Pedal Review

As far as loop pedals move, we can confidently state Boss stands out as one of the top manufacturers of these devices which hits the sweet spot between high quality and very affordable pricing, in addition to innovative functions and ease of use. This is our favorite looper pedal on this list.

This classic might be the most well-known and popular loop pedals.

Unlike its larger counterpart, this pedal only offers one loop monitor. This means there are 1 input and one footswitch. You still secure numerous loops and overdubs. While it’s a smaller, easier pedal compared to a lot of the powerhouses on the list, it has plenty of attributes.

The pedal is easy to understand, with lights that allow you to know what’s going on. There’s 1 knob for the general quantity and two buttons for selecting up and down. Its typical Boss design makes it both portable and sturdy, taking up little space in your pedalboard considering how much you get out of it.

  • Great build quality
  • Easy to use
  • Quantize and auto-start for better sync
  • Backing tracks included
  • 3 hours of recording, 99 memory slots, stereo I/O, and a compact body.

 We took it outside for a little spin, you can find our conclusions in the full review below.

Features
As mentioned, we are looking at classic Boss casing using a hot red finish. The pedal is powerful, most definitely roadworthy, and highly dependable even in the long run. 

Controls
So far as controls go, we like the way the manufacturer managed to spread the footswitch-related works around despite using just one footswitch (the massive thing in the front). So the big button can be used for beginning the recording (one tap) and stopping it (two taps). To allocate a memory slot to a loop listed, the player is given two buttons to select among the 99 accessible spaces.

Performance
If it comes to sound quality of loopers, a significant section is that the listed part sounds natural, organic rather than too plastic. The RC-3 meets those demands with a clear sonic punch and simple to use controls.

The recorded 3-hour recording period is way more than most players need through a show and more than sufficient for preserving an essential record of loops.

3 Hours of Stereo Recording

 

Inputs and Outputs
Guitarists who want to integrate external stereo effects devices will be excited about the real stereo I/O. This is a big improvement over the RC-2 Loop Station, and let’s Boss compete with Digitech’s JamMan Stereo. Bear in mind that this pedal does add a bit of noise, so if you are a real audio purist, you may want to spend a little more cash for a cleaner overall sound. If you are just practicing at home, a small noise is not the worst thing, and it is not really that noticeable.

 

Value/Conclusion
For the recorded cost, the RC-3 provides a killer sonic strike. 


 

 

Donner Tiny Looper Guitar Effect Pedal Review

The very first budget choice on the listing does, in actuality, offer many of the functions found in the pedals mentioned above.

You get 10 minutes of looping time with infinite overdubs, and you can undo and redo your actions. You receive the typical reverse and half speed playback styles also. Mono output and input constraints its prowess a bit, though looping pedals are generally among the first in any given signal chain. It’s true bypass, so that your signal goes through unaltered when you turn off the effect. On the other hand, the cheap circuitry can color your signal a little.

Operating the loop with one footswitch may seem a little tricky at first, however, the multi-function switch makes it a bit easie with the LED indicator. Clicking and holding the switch down until the light flashes green deletes the final loop. Clicking stops playback. Holding down it after double clicking will delete all listed loops.

Aluminum casing of the small looping pedal is stronger than you would expect for this price range. It seems durable. Also, it is easy to transfer music between the pedal and your PC.

Pros:

  • Very affordable
  • Small and convenient build
  • Import/Export loops

Cons:

  • Very basic functionality
  • Extremely limited controls

IIf you are on a tight budget or you do not need anything fancy, then this looping pedal is what you search.

 

 

 

Nux Loop Core Review

 

The Loop Core pedal out of Nux is a handy solution for players in pursuit of an advanced guitar pedal at a budget-friendly cost tag. Coming at a distinctive metal yellow casing, the device combines high-quality sound with a series of frequently used advanced functions like the ability to incorporate the tap tempo feature.

 

Saving Loops
The Loop Core will save as much as 99 loops, or up to 6 hours, which is significantly more than enough. Honestly, I would rather play and record loops live and don’t tend to save them. But if you have a whole set pre-planned, it could be quite useful to have a couple of set loops saved. To save a loop, you just record it, then press the save button. The display screen will blink the amount of the slot currently chosen. A dot at the bottom right-hand corner means there’s already a loop stored in that slot, in which case you can delete it use the up/down buttons to pick another slot. As soon as you have selected a slot, you just press save again. This conserves your loop and the drum pattern, if one was chosen.

 

Drum Patterns
There are 40 drum patterns to play along with on the Loop Core. To select them, you just hold down the”Rhythm” button, then use the up/down buttons to scroll through the routines. As I mentioned in my review of the Boss RC-3, there are built in drum patterns, but it ain’t Lars Ulrich backing you up. It is similar to a one-armed drummer keeping time. I really like having the built in drum-patterns since it helps you practice your timing, and is faster to access than booting up some beats in GarageBand, Ableton Live, or any other computer program. By the way, the Boss RC-3 only has 10 drum patterns, so the Loop Core comes out ahead in this regard. Personally, I just use 3 or 4 of those more simple patterns anyway, so its not all that important to me either way.

The volume knob has an inside and outer ring so that you can control the volume of the drum patterns individually from the loop volume, which will be nice!

.

Controls
We’re looking at a one-switch pedal, but the producer was intelligent enough to separate the save and delete functions and delegate them a distinct button. This means that the frontal foot-switch is utilized only for starting and finish the recording of the loop, unless tap tempo is changed on, of course.

And speaking of rhythm, the system utilizes a total of 40 onboard drum layouts for you to pick from throughout the Rhythm button.

Performance
The pedal delivers a natural and natural sound or the loop, and even when effects are added to the mixture, the sonic output of the loop remains natural and straightforward to adapt to a variety of effects.


 

 

 

TC Electronic Guitar Ditto Review

If you prefer your loopers leisurely, concise, yet highly effective and elite, we recommend giving the Guitar Ditto from TC Electronic a look. Featuring classy looks and not anything more than a single button and one knob, this fella is as powerful as they capture.

 

 

The Features You Want and Nothing Else
The whole doctrine of the TC Electronic Ditto is simplicity. Instead of cramming hundreds of save places, a megaton of attributes and a cacophony of controllers into their looper, their intent is to make something eminently user-friendly. Concerning appearance, at least, it completely fulfils that objective. The pedal is only a measly 3 5/8 ” by 1 5/8″ in size, with one clearly labeled dial, one multi-function button, an input jack, an output, a mini-USB port and a port for the power source. It’s hard to imagine a pedal simpler.

 

Characteristics
The very first thing we noticed about this tool is impeccable craftsmanship and tasteful, modern looks. Then, you find that the metal casing is sturdy and well build, giving the impression of a strong unit and a quality product. Seeing that simplicity is that the word of the day here, we were not surprised this is a mono pedal.

The audio quality is on a high level, the recorded sound that gets in the loop is organic, natural, and very close to the original, and we could pretty much give zero complaints. Additionally, the device operates excellent when coupled with different effects, too, providing the loop with zero sonic interference or lousy audio. As soon as you work out how to control the footswitch — that should not take long at all — you are set to loop away!

Value/Conclusion
You get what you pay for here. The features are fundamental, yet effective, and so are the controllers. However, we are still coping with high-quality electronics and wiring here, as well as a top-notch sound and standard performance. Add those tasteful looks and sturdy build to the mix and you get a very nice deal for the listed cost. Good stuff, highly suggested!

Bonsai Music Looper Review


As one of the best picks for the title of the best cheap looper pedal, the Bonsai Music Looper is a small, yet highly effective device that will get the job done at a fair price. Adding a surprisingly high-end pair of particular elements, this fella gives away an impression that is pretty much anything but cheap.

From looks to sound quality and functionality, this is one solid piece of music equipment. Simplicity is really the word of the day with Bonsai, but it still easily covers the needs of the vast bulk of musicians on the market.

Controls
Making matters as simple as possible, the manufacturer has chosen to include just a single control knob and one footswitch for this item. This produces the pedal quite simple to use, provided that you learn that catchy change. The Level knob is used to adjust the total amount of the loop effect that gets infused into your final sound output, while the footswitch is used to control the tape itself.

Here is how it works — you tap on the button once to start the recording, then tap it twice to terminate the recording as soon as you’re done with crafting the loop. Last, you hold the button for a few seconds when you’re done and would like to erase the loop to make a new recording. It’s rather simple and just takes a bit of foot practice to master.

Performance

When all is said and combined, this is a great thing. The looks are great, pro-level for sure; durability is tremendous, the pedal is dependable, functionality is topnotch, the sound is clear and natural, the stomp-box is simple to use, and the price is most definitely in the budget-friendly industry. Good stuff!


 

 

 

Electro Harmonix 720 Stereo Looper Review

This simple-looking looper from EHX hides a great deal of powerful looping functionality under its basic-looking surface. The build is similar to that of the Ditto X2 in both dimensions, robustness, and design. The most important distinction is the pop-less design of the footswitches. When it comes to looping, however, that the 720 goes a step or two farther.

 

Pros:

  • Simple, user-friendly design
  • 10 channels and up to 12 minutes of audio
  • Very sturdy build
  •  Simple operation, excellent sound quality, plenty of useful effects and extras, and a good price to boot.

Cons:

  • Limited control over loops
  • No sync or tap tempo

Quality-sounding, easy to use, sturdy and reliable, this is a product we can’t complain all that much about. We played about with it a bit, you can find our conclusions in the full review below.

 

A Little Fatter; A Little Better
The big difference of the 720 Stereo Looper compared to this Nano Looper 360 is the size and number of footswitches. The pedal is about the same length from top to bottom — at 4.75 inches or 121 mm — but the diameter has been increased from 2.75 inches (70 mm) to 4 inches (102 mm), allowing a lot of space for a whole additional footswitch and more.

 

The Features Every Looper Needs
The core looping function works in precisely the same way: with an empty memory location chosen, you hit the”Loop” footswitch to begin recording, play the base loop you’ll build the rest on (as an example, your baseline, riff or chord progression), hit”Loop” again when you’re done to begin playback and repeat the process for any overdubs. As with the majority of loopers, you can record as many overdubs as you like. Also, if you want, you can set the 720 Looper up to go straight into overdub mode when you hit the footswitch for the second time.

 

Sound Quality and Connections
The other big improvement over the Nano 360 is that the 720 Looper currently supports stereo looping, with two 1/4 inch ins and outs on the sides of the pedal. The audio quality is excellent, with a 44.1 kHz sample rate and 24-bit depth, and it doesn’t affect your tone noticeably at all, even with multiple overdubs — perhaps you’ll notice some impact when you have a more attuned ear than mine, but for me there are no complaints.

The rest of the jacks on the 720 Looper are for the supplied AC adapter and an optional foot controller. They indicate the Digitech FS3X 3-Button Footswitch, which gives you the options of an instantaneous undo/redo and changing the memory location hands-free.

Performance
As expected, the audio quality of loops is topnotch, authentic to the original and natural. But we’re pleasantly surprised by how good the audio signal remains when these two novelty features are switched on. Even in reverse, the audio signal isn’t digitalized or artificial, which merely deserves kudos.

.

Digitech JamMan Stereo Looper Review

The construct is stronger than many additional DigiTech pedals, that has the added benefit of helping to keep the pedal stay in place during vigorous utilization on point. Four hardy footswitches take up most of the surface. One begins playing or recording loops, other works as a stop switch that can also be employed to adjust the tempo. The remaining two switches are for browsing through saved loops, on cycles upward throughout the stored banks, the other cycles downward.

Digitech is a company that managed to grab a reasonable share of the loop pedal marketplace as a result of a string of products that offer high excellent audio together with top-notch craftsmanship at a fair price.

As their entry item and a looper that covers the basic demands of the vast majority of gamers, the JMEXTV JamMan Express XT pedal is a nice pick for guitar players of all levels and styles. We took it out for a little spin around the block, so it is possible to take a look at our thoughts and decisions in the entire review below.

 

Memory
To store your loops the JamMan gives you 99 places, which are saved on a Compact Flash card. With the device you get a 128MB card, which is good for around 24 minutes of recording time, but you can get cards of up to 2GB, which provide over half an hour of storage period. In addition to this, you can even connect to your computer via USB, and maintain any important loops saved on your hard drive.

.

Features
Aside from a slick blue metallic casing, the pedal functions as a stereo device with two inputs and a pair of outputs. This permits you to add two instruments into the looping mix, as well as utilize the stomp-box with a stereo rig, which is excellent for more sophisticated and demanding musicians.

In total, this Digitech fella can store up to ten minutes of stereo-quality sound footage, which can be far more than enough for any gig, together with unlimited overdubs and also an undo/redo attribute.

We are dealing with a true bypass pedal here, which is particularly significant with a loop pedal. Just a single footswitch has been included in the mix, but different LED status indicators for Recording, Overdub, and Play modes do make it significantly easier to control this monster.

The item weighs at 10.6 ounces and includes a total size of 4.6 x 3.2 x 2.1 inches.

Performance
For the listed price tag, this fella delivers the goods. It has all of the essential functions in its pocket, the controls are on-point and straightforward, and the sound quality is most definitely alright. If you are not looking into the area of looping too deep, this can be a legitimate choice.

Vox VLL1 Review

This is a superb choice for beginners who want an all-in-one solution with a looping pedal which works nicely without costing a lot of money.

Pros:

  • Multitrack looping with separate pedals
  • Quantize function
  • Multi-effect unit included
  • Easy to use

Cons:

  • Only one input

Features
Since it becomes apparent in the get-go, we are coping with a dual-pedal device revolving around a string of consequences and also a loop function. In general, there are 12 various on-board effects you’ll be able to use in your operation and combine them to create up to 90 seconds of loops through two independent stations.

It is possible to create additional overdubs and create additional undo and redo edits. The product also includes the Quantize feature which allows you to make phrases of any desired length within the given limits or synchronize the two recorded loops to a tempo of your selection.

The item features a tool input along with an XLR mic input, letting you add up to 2 audio sources to your looping mix.

Value/Conclusion
For your listed price, this is more than a reasonable thing. When you take into consideration the significance of experimenting with guitar effects, this becomes a highly recommended rookie thing in our book. It’s one of those bad boys that will provide you the impulse to constantly experiment, find new grounds and yearn for more. As long as you’re after a good newcomer loop pedal, this item is a purchase you cannot regret. Good stuff!


Boss RC-300 Loop Station – The Absolute Master Of Loop Pedals

When it comes to the build, it’s just exactly what you expect from Boss. Sturdy with an intuitive layout which makes it effortless to use all of the critical functions just the way that you would like to. There are also various finer controls that are going to take a while to get accustomed to, but it’s going to be very rewarding for the innovative musician. The loop station provides you with three stereo tracks, that you are able to synchronize. You get the choices of XLR and 1/4″ connection, and there is a level fader for each individual track. The important looping controls are easy to work, with different pedals for stop and start. These variables make the RC-300 Loop Station simple to use in concert or on the street.

You also get a group of 16 onboard effects and an expression pedal to make the sound come to life. With so much creative freedom, you’re likely to spend many hours experimenting with loops. Thankfully, the internal memory can hold up to three hours of documented loops, and it is simple for your recordings to your PC. When you have spent enough time to get acquainted with the controls, there is not much you can’t do with this item.

Pros:

  • Three separate channels with plenty of control
  • Great build
  • Hours of recording time
  • Built-in effects and expression pedal

Cons:

  • Expensive

 

The RC-300 Loop Station’s internal memory provides enough space for 3 hours of recording. This improves on the RC-50 more than sevenfold, and the RC-300 may also be connected to your computer using a USB cable. You can literally export your whole loop collection to your computer, infinitely increasing the number of loops you can store. Essentially, you’ll never run out of memory because you can always add another external hard drive to your rig.

 

Built-In Effects
Among the most notable additions to the RC-300 Loop Station is its built-in consequences. You can add flanger, phaser, pitch-bend, chorus, tremolo, distortion, delay and lo-fi effects to your recordings.

 

Characteristics
Well, this guy is large! We’re looking at an entire 10.8 pounds and a size of 9 x 21 x 76 inches, in addition to a pair of three stereo tracks using dedicated footswitches. Each of the monitors has a dedicated fader, while the whole system is capable of storing up to three hours of stereo-quality loops via 99 onboard slots.

Apart from the standard looping characteristics, the system offers a set of 16 built-in guitar effects optimized for loop use. Also included in this combination is USB connectivity, allowing you to export your paths in .WAV format.

Controls
This is where things get hot! First of all, we’re taking a look at a whopping collection of 8 footswitches. .

On the far right, the manufacturer added an expression pedal, which is not that significant for the loops, however, comes as vital for controlling the on-board effects.

But we have only scratched the surface since the device also uses a bit of a control room for adjusting the effects. The controls are intuitive, but also fairly advanced, so better make sure to dedicate enough time to master all of the tweaks and tricks this guy has to offer you.

Performance
In a nutshell, this thing has everything. On the other hand, you have to prepare a variety of loops and actually craft an entire show ahead of the gig and then easily manipulate the loops stage; on the other hand, we love the way the effects are adjusted to be utilized in combination with loop pedals, securing maximum audio quality and zero bad, an artificial audio.

Value/Conclusion
When all factors are combined, this product provides a good bang for the buck. Yes, it’s a high-end thing, however, you will surely get a high-end performance. Additionally, you’ll need to study that guide and invest your time into mastering this looper. It offers a lot of features, and you can not learn how to properly utilize them all in a minute.


 

 

 

What to consider when purchasing a loop pedal for guitar

Similar to any kind of pedal, loopers have their very own string of independent elements to look out for. While we recognize that all of our beautiful visitors have the personal preferences of theirs, a particular string of conditions may be drawn on the reason why an excellent loop pedal.

Foremost and first, the recorded good needs to be organic and authentic. Any kind of sonic interference or poor rendering are immediate red-colored flag raisers for us, and also we firmly discarded every product we experienced that could not match this standard need.

Should I look out for loop length?

Loop length might look like a huge deal, but it is really not. The point is most pedals provide ample recording time. When you point about it, the bulk of players will barely need even more than a single minute of shooting some time to lay down the track to loop, as well as the most affordable stomp boxes often provide around ten minutes of capturing time.

Should I look out for loop storage?

Many loop pedals do not have internal storage and ignore the loops the moment they’re turned off or maybe another loop is included. But in case you would like to have the ability to recall the loops you laid wrong for potential use, you are going to want to think about getting pedals with internal storage. Several items have a specific amount of built-in room, while higher versions include a function to place an external SDHC card and also store the products there.

What is the big difference between mono as well as stereo loopers?

When looking at the output, stereo outputs let you run the pedal by way of a stereo rig, or perhaps through separate amps. So far as stereo inputs go, getting 2 In jacks enables you to do some pretty unique experiments. For instance, you can plug in a mic to your next input and make use of it to add different percussive instruments to the loop of yours. You can also include vocals or perhaps pretty much anything that may be captured via a microphone.

Conclusion
And we’ve thus reached the end in our loop odyssey! We wish you’ve experienced the ride, ensure to stay tuned for most excellent deals on the internet. The last action today is usually to write down the personal needs of yours, available spending budget and preferences, single out your personal best guitar looper and also treat yourself with among these bad boys right today. Rock on!

FAQ

What is the best guitar looper for bass?

In our opinion, the Boss RC3 is the best for bass.

.What does a looper pedal do?
A looper pedal is a device used to record samples from an instrument that can be played over and over again or even dubbed. The guitarists used the pedals or switches to control the loop with their foot. The idea was to make it an easy process for them to record tones in loops and use effects to generate music.

Here is what you can do with the pedal:

Record Solos: You can play chords in your guitar and record these samples. This permits you to practice soloing techniques. It’s an excellent way to increase your skills on your own.

Create Music: Obviously, the loopers are widely used for composing songs. It is possible to make amazing sounding tracks and write the lyrics to it.

Learn: You need to learn how your favorite guitarist played a lick? The looper can help you do this with the auxiliary input. You can plug into your phone or mp3 device to perform a tune.

Experiment: One of the most popular recent recording artists to use loopers for his songs is Ed Sheeran. He has managed to combine his superb vocals with some great loops which make him sort of a band in his own right. You can do the same and experiment with the loops and tones to create something unique.

What’s analog dry through?
It is a feature on looper pedals that divides the signal into two. 1 side is sent to be the ramifications side where it’s converted into digital signal whereas the other hand remains intact i.e. the output is just like input and it stays dry. The reason for this feature is to retain the purity of the dry sound signal.

Not all loopers have this feature so you have to make sure if you want to retain pure signal that you obtain a looper that has this attribute. Additionally, it does not actually need to be expensive because this attribute is present in loopers that cost less than $100. This feature is liked by many guitarists and is great because it does not affect the sign and you hear it as pure as it came out.

Each of them has its own set of advantages. It depends on your application about which one is most suitable for which type of looper and would get the best results. As an example, in a live setup using one pedal can be awkward as you’ll have to manually change buttons. With this scenario, the best looper would be a multi-pedal or multi-switch one that will let you utilize the features rather quickly and easily. Because of this, for professional on stage use, a multiple pedal looper is your best alternative and is widely used.

For home use and private practice, both can work out well and provide you a great deal of control and convenience. However, single pedal loops tend to be smaller and lighter so it is easier to handle them and carry them around. They’re cheap too so you can even purchase several and make connections to have a multiple pedal loop system.

There’s not any clear winner as it ultimately depends on your situation. A good deal of guitarists prefers multi pedal loops as these are quite professional (click for our guide here). You can easily find some high-quality multiple switches or pedals. If you’re unsure about which one you would want you can get one that has this capability.

Leave a Reply

Your email address will not be published. Required fields are marked *